Painting a custom home and painting a 40-unit townhome development are not the same trade at different scales. The constraints change character entirely.
On a custom home the variable is detail. On multi-family the variable is repetition, and the whole economics of the job turn on whether your painter is set up to exploit it or just doing the same custom-home process forty times.
Paint Gunners runs new construction painting on multi-family and townhome projects across Redmond, Bothell, Everett and the rest of King and Snohomish County. Here is what actually governs these jobs, beyond the three-phase sequence covered in our new construction guide.
Repetition Is the Whole Game
Forty units with four floor plans is really four jobs done ten times each.
That changes how a crew should be organised. Rather than finishing unit one completely, then unit two, a production crew moves by operation: one pass does texture across a building, the next does prime, the next does finish. Each person repeats the same task on the same floor plan, which is where the speed comes from and, more importantly, where consistency comes from.
The practical consequence for you: a bid priced per unit by someone who intends to work unit-by-unit is usually higher than a bid from someone set up to run operations in sequence, and it will hold the schedule less well.
Ask how a bidder plans to sequence the work across buildings. If the answer is vague, the price is a guess.
Texture Consistency Is the Thing Buyers Notice
This is the single most common complaint we get called in to fix on completed multi-family.
Buyers tour three units. In a custom home nobody has a reference point. In a townhome development they have two reference points in the same hour, and the human eye is very good at spotting that unit 12’s walls read slightly different from unit 14’s.
Texture drift happens when different sprayers, different mud batches, or different days produce slightly different orange peel or knockdown. It is invisible in isolation and obvious in comparison.
Preventing it is procedural, not magical: same equipment settings, documented spec, same operator across a phase where possible, and a sample board that the whole crew works to rather than from memory. Boxing paint across batches matters for the same reason, since a colour difference between buildings is even more visible than a texture difference.
Phased Handover Changes Everything
A custom home finishes once. A development finishes in waves, often with buildings occupied while others are still in drywall.
That creates a problem that does not exist on a single-family build: you have residents and construction on the same site. Noise windows, parking, dust, overspray drift, and site access all become scheduling constraints rather than afterthoughts. Our commercial painting work runs on exactly these constraints, which is why the two services overlap more than people expect.
Three things worth settling before the first building:
Which buildings are occupied by when, so exterior work on neighbouring buildings can be scheduled around it rather than discovered.
Where the crew parks and stages, because once residents are in, the lay-down yard they have been using may become their parking.
Who holds the keys during turnover, which sounds administrative until the punch crew cannot get into eight units on a Friday.
Punch at Scale
On a custom home, punch is a walk with the superintendent and an afternoon of touch-ups. On 40 units it is its own phase with its own budget line, and it is where multi-family schedules most often slip.
Every trade after painting damages walls. On multi-family that is flooring, appliance install, final electrical, cabinet hardware, and then the warranty walkthrough with the buyer. Each one is a separate opportunity for a scuff.
Two things make this survivable:
Schedule final finish as late as the sequence allows. Every day of other trades working against finished walls is punch work you are paying for twice.
Budget touch-up as a phase, not a favour. A painter who treats punch as goodwill will treat it as low priority, and you will feel that at buyer walkthroughs when closings are on the line.
We hand over a colour and product schedule by unit type at closeout, so your warranty team can match a touch-up in year two without opening a can to guess.
What Drives the Price
| Factor | Effect |
|---|---|
| Number of distinct floor plans | Fewer plans, lower cost per unit |
| Texture spec | Level 5 smooth is substantially more drywall finishing |
| Trim package | Craftsman casing and wainscot vs ranch casing is a wide spread |
| Stair towers and corridors | Staging-intensive, priced separately from unit interiors |
| Exterior scope | Lift and swing stage time on three-storey and up |
| Occupied-phase work | After-hours and zoned scheduling carries a premium |
Multi-family per-unit pricing typically runs $2,500 to $5,500 for interiors, with exterior envelope quoted separately. Both get custom-quoted off plans, because the floor-plan count and the trim package move the number more than the unit count does.
The Dependencies That Hold the Schedule
Same as any build, but the cost of missing them multiplies by the number of units.
Carpentry complete, because sawdust in wet paint cannot be fixed afterward. HVAC operational, because cure conditions in a Puget Sound winter depend on it. Lighting roughed in, because a crew cannot produce a clean finish in a space they cannot see properly.
We put dependencies in writing at contract, and our builder’s scope of work checklist covers the lines worth putting in yours. On a single custom home that is good practice. On a 40-unit build it is the difference between a painter who absorbs a slipped drywall schedule and one who hands you a change order.
Sending Plans
For a bid we want plans, the finish schedule, texture spec, and the phasing plan if one exists. Turnaround is usually five business days, broken out by phase so you can see texture and prime, finish, and punch as separate lines rather than one lump sum you cannot interrogate.
If you are also handling occupied repaints on existing stock, that is commercial painting and runs on the same crew and the same model.
Send plans for a multi-family bid or call (206) 930-8885. Serving Redmond, Bothell, Everett, Lynnwood, Kent and 23 cities across Snohomish and King County.
